Home :: Chevrolet :: Blazer
Recalls for Chevrolet BLAZER 1995
Select a Chevrolet BLAZER 1995 recall from the list:
- EXTERIOR LIGHTING : HEADLIGHTS
- certain anzo combination headlamp assemblies sold as replacement lamps for use on certain passenger vehicles. some combination lamps are not equipped with amber side reflectors which fail to conform to federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment.
- FUEL SYSTEM, GASOLINE
- certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes, click on "document search" and then "bus applications"). the connector on the fuel filter was not manufactured to honeywell's specification. as a result, the o-ring may not seat correctly on the fuel line.
- FUEL SYSTEM, GASOLINE : DELIVERY : HOSES, LINES/PIPING, AND FITTINGS
- certain r&b, inc. central multiport fuel injection (cmfi) fuel return lines, models help 55163, napa balkamp 700-3270, and the connection 2560001, sold for use as replacement equipment for the vehicles listed above. the fuel return line has a mechanical bleed valve which was not installed at the proper torque.
- VISIBILITY : WINDSHIELD WIPER/WASHER
- vehicle description: light duty pickup trucks and sport utility vehicles, 2 and 4-wheel drive. solder joints near the wiring harness connector can crack causing the windshield wipers to work intermittently.
- FUEL SYSTEM, GASOLINE : STORAGE : TANK ASSEMBLY
- vehicle description: 4-door, 4-wheel drive and all-wheel drive multi-purpose passenger vehicles. during development testing, the prop shaft contacted the inboard side of the fuel tank allowing fuel leakage. this leakage was in excess of the amount permitted by fmvss 301, "fuel system integrity."
- ENGINE AND ENGINE COOLING : COOLING SYSTEM : FAN
- fan blade rivet breakage can occur causing the fan blade to separate from the spider.
- SERVICE BRAKES, HYDRAULIC : ANTILOCK
- this is not a safety recall in accordance with the safety act. however, it is deemed a safety improvement campaign by the agency. vehicle description: certain light duty pickup trucks, sport utility vehicles, or minivans equipped with 3-sensor abs (antilock braking system) ebc4 units.
- SERVICE BRAKES, HYDRAULIC : ANTILOCK
- vehicle description: certain 4-wheel drive pickup trucks and sport utility vehicles equipped with abs (antilock braking system) manufactured from september 1989 through august 1996. under certain driving conditions the switch which signals the abs system whether the vehicle is in 2-wheel or 4-wheel drive can malfunction causing increased stopping distances during abs stops while in the two-wheel drive mode.
- SERVICE BRAKES, HYDRAULIC : PEDALS AND LINKAGES
- the brake pedal pivot bolt was started in the weld nut, but was not torqued correctly causing the bolt to disengage from the weld nut.
- SUSPENSION : FRONT : CONTROL ARM : UPPER BALL JOINT
- the upper ball joint nuts were under-torqued resulting in improper seating in the steering knuckle.