Home :: Chrysler :: Cirrus
Recalls for Chrysler CIRRUS 1995
Select a Chrysler CIRRUS 1995 recall from the list:
- POWER TRAIN : AUTOMATIC TRANSMISSION : LEVER AND LINKAGE : FLOOR SHIFT
- on certain passenger vehicles, the floor shifter ignition-park interlock may fail and allow the shifter to be moved out of the park position with the key removed. an inoperative interlock may also allow the key to be removed when the shifter has not been placed in the park position.
- SERVICE BRAKES, HYDRAULIC : ANTILOCK
- corrosion of the abs hydraulic control unit can cause the solenoid valves to stick in the open position.
- SEAT BELTS : FRONT : ANCHORAGE
- vehicle description: passenger vehicles. the rear seat belt anchor does not achieve the loading required by fmvss no. 210, "seat belt assembly anchorages."
- ENGINE AND ENGINE COOLING : ENGINE : GASOLINE
- in certain vehicles, the engine cylinder head oil galley plug does not seal properly and engine cylinder head oil is not adequately retained.
- SUSPENSION : FRONT : CONTROL ARM : LOWER BALL JOINT
- vehicle description: passenger vehicles. the lower control arm ball joint can separate due to loss of lubrication.
- POWER TRAIN : AUTOMATIC TRANSMISSION : PARK/NEUTRAL START SWITCH
- vehicle description: passenger vehicles equipped with automatic transmissions. the adjustment of the cable connecting the console shifter mechanism to the ignition key can cause a trapped key condition which can result in a low force required to depress the shift button. a combination of applying a mis-adjusted release button with a low force attempt to shift out of park with the key in the locked position, can break the connecting pin in the shifter.
- SERVICE BRAKES, HYDRAULIC : FOUNDATION COMPONENTS : MASTER CYLINDER
- the brake master cylinder can leak brake fluid due to a damaged double lip rear piston seal.
- FUEL SYSTEM, GASOLINE : DELIVERY : FUEL PUMP
- certain airtex fuel pump modules, p/nos. e7089m, e7094m, e7113m, and e7129m, manufactured between june 1 and september 24, 2006. these fuel pump modules were sold as aftermarket for use in certain daimlerchrysler vehicles listed above. silicone material used in manufacture of the flapper valve was out-of-specification, leading to excess swell of the flapper valve restricting the flow of fuel to the fuel pump module.