Home :: Chrysler :: Sebring
Recalls for Chrysler SEBRING 1995
Select a Chrysler SEBRING 1995 recall from the list:
- FUEL SYSTEM, GASOLINE : DELIVERY : FUEL PUMP
- certain airtex fuel pump module assemblies, p/n e7081h, sold for use as replacement equipment for the vehicles listed above. the wall of the flared fitting of the fuel pump is not thick enough to prevent the mating threaded fittings from bottoming out before an adequate seal is achieved. this condition may result in leakage of fuel at the connection of the vehicle fuel line and the fuel pump module assembly.
- FUEL SYSTEM, GASOLINE : DELIVERY : FUEL PUMP
- certain tigas fuel pump modules manufactured between june 1 and september 24, 2006, sold under various brand names and p/nos. these fuel pump modules are sold as aftermarket for use in certain daimlerchrysler vehicles listed above. silicone material used in manufacture of the flapper valve was out-of-specification, leading to excess swell of the flapper valve restricting the flow of fuel to the fuel pump module.
- SUSPENSION : FRONT : CONTROL ARM : LOWER BALL JOINT
- vehicle description: passenger vehicles. if the rubber boots on the lower lateral arm ball joints of the front suspension were damaged during assembly, dirt and water can intrude. also, mmc has added the potential of leaking moisture, which can cause the ball stud to corrode.
- SUSPENSION : FRONT : CONTROL ARM : LOWER BALL JOINT
- vehicle description: passenger vehicles. if the rubber boots on the lower lateral arm ball joints of the front suspension were damaged during assembly, dirt and water can intrude.
- SUSPENSION : FRONT : CONTROL ARM : LOWER BALL JOINT
- vehicle description: passenger vehicles. the lower control arm ball joint can separate due to loss of lubrication.