Home :: Dodge :: Dakota
Recalls for Dodge DAKOTA 1998
Select a Dodge DAKOTA 1998 recall from the list:
- EXTERIOR LIGHTING
- certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
- ENGINE AND ENGINE COOLING
- certain replacement k&n fuel performance kits, p/nos. 57-1509, 57-1511, 57-1511-1, 57-1517, 57-1517-1, 57-1527, and 57-1530. also, a small percentage of these kits were sold under the mopar performance parts brand name (p/nos. p5007069 and p5007070). all kits were manufactured from april 20, 1999, through september 23, 2004. these assemblies were manufactured as replacement equipment for certain dodge pickup trucks and suvs. a small piece of material from the tube wall could be sucked into the engine throttle body, which could cause the throttle to become jammed in the open position.
- SERVICE BRAKES, HYDRAULIC
- certain aftermarket brake hydraulic master cylinders sold as replacement brake cylinders for certain ford, daimlerchrysler, and jeep passenger vehicles. these brake cylinders were sold under the brand names of napa, raybestos, aimco, ac delco, carquest, bendix, and wagner. only products that were manufactured from july 27, 2005 through january 17, 2006 (date codes 0529 through 0602) are subject to this recall. when subject to very cold temperatures, an internal seal in the master cylinder could lose flexibility and may cause brake fluid to leak.
- EXTERIOR LIGHTING
- certain aj motorsport combination lamps sold as replacement lamps for use on the above listed passenger vehicles. combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
- AIR BAGS
- vehicle description: pickup trucks. sound deadener material inside the steering wheel could become detached from the cover and housing. note: the ram pickup trucks were built at the warren assembly plant ("s" in the 11th vin position) from may 16, 2000 through october 23, 2000; st. louis north assembly plant ("j" in the 11th vin position) from may 19, 2000 through october 23, 2000; lago alberto assembly plant ("m" in the 11th vin position) from may 23, 2000 through october 23, 2000; and saltillo assembly plant ("g" in the 11th vin position) from may 23, 2000 through october 23, 2000. important: vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. in addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.
- SERVICE BRAKES, HYDRAULIC : FOUNDATION COMPONENTS : HOSES, LINES/PIPING, AND FITTINGS
- vehicle description: pickup trucks. some vehicles may have been built with inadequate clearance between the rear axle vent hose and the brake hose.
- SERVICE BRAKES, HYDRAULIC : FOUNDATION COMPONENTS : HOSES, LINES/PIPING, AND FITTINGS
- vehicle description: pickup trucks built with 2.5l engines. some vehicles may have been built with inadequate clearance between the left front brake tube and the power steering hose.
- SERVICE BRAKES, HYDRAULIC : ANTILOCK : CONTROL UNIT/MODULE
- vehicle description: light duty pickup trucks (2 wheel drive only). the front brake hoses or anti-lock brake system (abs) sensor wire may be abraded at the front wheels by contact with a front wheelhouse splash shield.
- SERVICE BRAKES, HYDRAULIC : FOUNDATION COMPONENTS : HOSES, LINES/PIPING, AND FITTINGS
- vehicle description: light duty pickup trucks (2 wheel drive only). the front brake hoses or anti-lock brake system (abs) sensor wire may be abraded at the front wheels by contact with a front wheelhouse splash shield.
- STRUCTURE
- vehicle description: light duty pickup trucks. these vehicles may have been built with bolts that were not properly hardened. the bolts were used to attach the cab and the core support to the frame.