Home :: Mercury :: Sable
Recalls for Mercury SABLE 1991
Select a Mercury SABLE 1991 recall from the list:
- VEHICLE SPEED CONTROL
- vehicle description: vehicles equipped with 3.8l engines and originally sold or currently registered in the following states: alaska, colorado, iowa, idaho, illinois, indiana, kansas, massachusetts, maine, michigan, minnesota, missouri, montana, north dakota, nebraska, new hampshire, new york, ohio, pennsylvania, south dakota, vermont, wisconsin, and wyoming. water can accumulate within the speed control cable conduit. if enough water accumulates, it could freeze within a low area of the cable routing when exposed to a long term cold soak at temperatures at least several degrees below freezing.
- STRUCTURE : FRAME AND MEMBERS
- vehicle description: passenger vehicles originally sold or currently registered in connecticut, delaware, district of columbia, illinois, indiana, iowa, kansas, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, nebraska, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, virginia, west virgnia, and wisconsin. the rear lower subframe mount plate nut can experience stress corrosion cracking if subjected to long term exposure to road salts. this can result in fracture and loss of the structural integrity of the subframe mount attachment. detachment of the body mounts at the rear corners of the subframe, which supports the engine and transmission, allows the rear corners of the subframe to drop.
- WHEELS
- children can accidentally lock themselves in the footwell area of the rear-facing third seat, or in the storage compartment in station wagons not equipped with an optional third seat. once the compartment is closed it cannot be opened from the inside.
- SERVICE BRAKES, HYDRAULIC : FOUNDATION COMPONENTS : DISC : ROTOR
- front disc brake rotors of the subject vehicles may experience severe corrosion if operated in areas where calcium chloride and sodium chloride are used extensively.
- SUSPENSION : FRONT : SHOCK ABSORBER
- the arc welds on the sway bar bracket, where it attaches to the strut reserve tube, did not fuse properly.