Home :: Mercury :: Sable
Recalls for Mercury SABLE 2000
Select a Mercury SABLE 2000 recall from the list:
- SUSPENSION : FRONT : SPRINGS : COIL SPRINGS
- on certain passenger vehicles originally sold in or currently registered in the states of connecticut, delaware, illinois, indiana, iowa, kentucky, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia, the front coil springs could fracture due to corrosion associated with salt used on the roadways during the winter. a fractured spring could move past the spring seat and contact a front tire.
- SERVICE BRAKES, HYDRAULIC : PEDALS AND LINKAGES
- certain passenger vehicles equipped with adjustable padels are being recalled in order to adjust the brake and accelerator pedals to a minimum of 50 mm of lateral separation. simultaneous application of both the brake and accelerator pedals could result in an increase in engine rpm.
- EXTERIOR LIGHTING : BRAKE LIGHTS : SWITCH
- certain passenger vehicles are being recalled to correct a problem with a malfunctioning stop lamp switch and/or associated wiring. this malfunctioning could render the stop lamps inoperable or cause them to stay on all the time. this could cause confusion to a following driver, which could lead to a crash.
- EQUIPMENT : OTHER : LABELS
- vehicle description: passenger vehicles. the "vehicle capacity weight" and "designated seating capacity" information was not printed on the safety certification labels affixed to these vehicles. on affected sable sedan vehicles, the "vehicles capacity weight" (and also the luggage load) information printed on this label is incorrect - sable wagon luggage load was incorrectly used for the sable sedan. these vehicles do not comply with the label requirements of fmvss no. 110, "tire selection and rims."
- EXTERIOR LIGHTING : TAIL LIGHTS : SWITCH
- vehicle description: passenger vehicles equipped with adjustable pedals. if the grease from the adjustable pedal assembly enters the stop lamp switch, it can contaminate the contacts leading to carbon build up, and potentially, a short circuit.
- EXTERIOR LIGHTING : HEADLIGHTS : SWITCH
- vehicle description: passenger and sport utility vehicles. due to the use of incorrect material by a supplier, the headlamp switch knob can fracture and separate from the headlamp switch.
- VISIBILITY : WINDSHIELD WIPER/WASHER : MOTOR
- vehicle description: passenger cars, sport utility vehicles, and light and medium duty pickup trucks. a switch located in the plastic cover of the wiper motor gear case could malfunction and overheat, potentially resulting in loss of intermittent wiper function, loss of wiper park function, complete loss of wiper function, or ignition of the plastic cover material. switch malfunction is most likely to occur when the intermittent setting of the wipers is being used, or when snow or ice obstructs the blades from returning to the "parked" position at the bottom of the windshield. these vehicles were built at the following assembly plants: atlanta plant from 2/11/00 through 7/31/00; chicago plant from 2/14/00 through 8/4/00; kansas city plant from 2/26/00 to 9/4/00; kentucky truck plant from 2/18/00 to 8/31/00; michigan truck plant from 2/23/00 through 8/3/00; norfolk plant from 2/21/00 through 7/27/00; wayne stamping and assembly plant from 2/25/00 through 8/15/00; and wixom plant from 2/15/00 through 8/8/00.