Home :: Nissan :: Sentra
Recalls for Nissan SENTRA 2000
Select a Nissan SENTRA 2000 recall from the list:
- ENGINE AND ENGINE COOLING
- on certain electric vehicles, the front suspension transverse link
- ELECTRICAL SYSTEM : IGNITION : MODULE
- on certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ecm) box emits sulfur as it cures.
- ENGINE AND ENGINE COOLING
- on certain passenger vehicles, the circuit board for the crank position sensor or cam position sensor may have an improper solder joint due to solder deformation caused by heat stress accelerated by the existence of flux residue during the soldering process.
- ENGINE AND ENGINE COOLING : ENGINE : GASOLINE
- vehicle description: passenger vehicles equipped with a 1.8 liter engine. the engine could stop running while being driven due to a defective crank position sensor. this could also result in the "service engine soon" warning light coming on or reduced engine power.
- SUSPENSION : FRONT : CONTROL ARM : LOWER ARM
- vehicle description: passenger vehicles. one or more of the three bolts used to attach each front suspension lower control arm to the body on the left and right sides may not have been properly manufactured.
- WHEELS
- vehicle description: passenger vehicles. the cooling holes in the steel wheel may have burrs on their edges as a result of improper manufacturing. these burrs can cause cracks as the vehicle is being driven. cracks can propagate between adjacent cooling holes. if enough cracks develop between the cooling holes, the wheel could fail and separate from the mounting hub without prior warning.
- EXTERIOR LIGHTING : HEADLIGHTS
- certain anzo combination headlamp assemblies sold as replacement lamps for use on certain passenger vehicles. some combination lamps are not equipped with amber side reflectors which fail to conform to federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment.