Home :: Peterbilt :: 367

Recalls for Peterbilt 367 2009

Select a Peterbilt 367 2009 recall from the list:

STEERING

paccar is recalling 2,096 my 2009 kenworth and peterbilt vehicles equipped with trw steering shafts. mislocation of a circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes.

TRAILER HITCHES

paccar is recalling 318 my 2007-2009 kenworth t800, w900, and peterbilt 357, 365, 367, 378, 379, 384, 385, 386,388, and 389 trucks equipped with premier trailer hitch assemblies. the pintle hitch assemblies may have been manufactured in a manner resulting in a reduction of fatigue strength of the pivot pins.

ENGINE AND ENGINE COOLING : ENGINE : DIESEL

paccar is recalling 4,883 my 2006-2009 kenworth t600, t660, t800, w900, t2000 and my 2008-2009 peterbilt 365, 367, 379, 384, 386, 387, 388 and 389 trucks. inadequate stiffness of the diesel particulate filter (dpf) bracket could result in separation of the dpf from the chassis.

LATCHES/LOCKS/LINKAGES : DOORS : LATCH

paccar is recalling 6,169 my 2008 kenworth t300, t660, t800, t2000, w900 and c500 vehicles and my 2008-2009 peterbilt models 365, 367, 384, 387, 388, 389 and 389 kits. certain door latch assemblies on these vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 206, 'door locks and door retention components." the rotor in some of these door latch assemblies did not receive the proper heat treatment and may be soft.

ENGINE AND ENGINE COOLING : ENGINE : DIESEL

paccar is recalling model year 2008-2010 kenworth t300, t270, and t370, model year 2009-2010 t800 and peterbilt model year 2008-2010 335, 340, and 367 vehicles built on cummins¿ diesel engine. the vehicles may be designed with a hard wired, dash-mounted switch that enables the vehicle operator to inhibit aftertreatment diesel particulate filter regeneration in environments where the operator believes it may be unsafe for elevated exhaust temperatures. due to an issue with the logic in the ecm software in these engines, the switch may not function correctly, leading the operator to believe that the switch is in "inhibit" mode when it is not.

PARKING BRAKE : CONVENTIONAL : AIR

paccar is recalling 1,043 my 2008-2009 kenworth c500, t2000,t660, t800 and w900 trucks equipped with bendix mv-3 dash control valves. the molded valve body has an incorrect core pin in the injection mold causing the valve body to be oversized in the double check valve area. this condition can allow the rubber double check valve to become lodged in the body opening under certain circumstances.

No consumer complaints found for this model and year