Home :: Volvo :: Acl
Recalls for Volvo ACL 1999
Select a Volvo ACL 1999 recall from the list:
- STEERING : LINKAGES : TIE ROD ASSEMBLY
- on some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
- STEERING : LINKAGES
- vehicle description: heavy duty trucks equipped with trw 20-edl ball-socket assemblies. certain of the ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket. these bearings were produced between july 5 and october 3, 1999.
- FUEL SYSTEM, GASOLINE : STORAGE : TANK ASSEMBLY : FILLER PIPE AND CAP
- vehicle description: heavy duty trucks equipped with a steel fuel tank. the closure only fuel tank cap, installed on the steel fuel tank, failed when the tank was dropped from a 10' height as required by fmvss no. 393, "liquid fuel tanks."
- STEERING : LINKAGES : TIE ROD ASSEMBLY
- vehicle description: heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets. the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
- SERVICE BRAKES, AIR : ANTILOCK
- vehicle description: heavy duty trucks built with bendix air abs with an ec-17 1030r electronic control unit (ecu), there have been reports of unwanted abs activation at low speeds caused by 1) chafed abs wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
- STEERING : LINKAGES : TIE ROD ASSEMBLY
- vehicle description: heavy duty, class 8, trucks equipped with tie rod assemblies containing 24-dl model ball sockets and manufactured by trw. certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.